Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Question about Quad 4C

Views: 5272

#76380

Question about Quad 4C | 22 September, 2016

Hi

I would like to know the process in wich the Quad 4C knows it has the correct component after taking it from the feeder. Recently I've been put in charge of a Quad 4C machine that is used to assemble two different boards. Each one has already a program sequence, everyday, depending on the board that we are manufacturing I simply download the correct program to the assembler. Lately I've noticed that with some components, the assembler discards them just right after taking them from the feeder. I have read something in the manual about tolerances, but where can I check these values that the machine has in each program? Thank you so much.

reply »

#76381

Question about Quad 4C | 22 September, 2016

Hello, The machine measures the part using the laser on the head after picking it up. It then passes or fails it by comparing it to the part size and tolerance for the pickup in the laser extents. You can see this in central controller under laser extents.

If you have more questions....you can find my email at:

www.precision-repairs.com

Thanks, Bob

reply »

#76382

Question about Quad 4C | 22 September, 2016

Thank you so much, Bob, I will be asking for more asistance in the future, since I am new to this technology,

regards

reply »

SMT Custom Nozzles

Panasonic OEM Solutions