Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Fuji CP6 and IP3 specifications request

Views: 1565

#76109

Fuji CP6 and IP3 specifications request | 4 August, 2016

Does anyone have the technical specifications for the Fuji CP6 and the Fuji IP3? Looking for the placement speed (parts per hour), accuracy, smallest/largest component size, fine-pitch (what size it can do). Our new sales guy is putting together something that he can hand out to perspective customers and has asked me if I can supply this information.

These machines seem to be of a vintage that this information is not readily available on the internet. Can someone help me out with this?

Thank you for any help.

reply »

#76113

Fuji CP6 and IP3 specifications request | 5 August, 2016

The IP3 specs are: PCB Dimensions Max: 508 mm x 457 mm - Min: 80mm x 50mm Thickness: 0.8 to 4.0mm

Component Capacity Tape: 74 - 8/12mm Device Locations Tray: 40 Locations

Placing Rate: 0.55 sec/component for small chips 1.25 sec/component for ICs 2.50 Sec/component for tray components

Applicable Components 0402 to 74x74mm

Placing Accuracy: Within ±0.025mm for 4-side leaded components ±0.01 for other components

Jerry

reply »

#76123

Fuji CP6 and IP3 specifications request | 8 August, 2016

Jerry,

Thank you!

Anyone have the CP6 specs?

reply »

#76126

Fuji CP6 and IP3 specifications request | 8 August, 2016

You may be able to get the specs from one of the used equipment companies that advertise here. Jerry

reply »

#76129

Fuji CP6 and IP3 specifications request | 9 August, 2016

•Rated Speed of 40,000 CPH •140 - 8mm Device Locations •14" x 18" Max PCB Size

PCB dimensions Max: 457mm x 356mm Min: 80mm x 60mm Board Thickness: 0.3 to 4.0mm

Component capacity Up to 140 types (8mm tape)

Placing rate 0.09 sec./component - 40,000 CPH

Applicable components 0402 to 19 x 20mm Maximum Component Height: 6mm

Placing Accuracy ± 0.01mm (3 s)

Power 3 phase 200 to 480 VAC, 10 kVA 1.25 kVA in power saving mode

Air Supply 0.5 MPa (5 kgf/Cm2)

Machine dimensions L : 4840mm W : 1690mm H : 1780mm

Weight Approx. 6000 kg

reply »

SMT Custom Nozzles

ii-feed SMD Intelligent Feeder