Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Lead trimming

Views: 987

#76015

Lead trimming | 19 July, 2016

I'm looking for a hand held lead trimming set of cutters with a catch bag for the leads. Has anyone seen this before? I found a few from Chinese websites but need something from a US link.

reply »

#76018

Lead trimming | 19 July, 2016

We used to use those, back in the bad old times. basically, it's a router with a blade on it that is used to trim the leads of PTH components that are mounted on boards.

Nasty process. Difficult to control. Messy, firing cut leads all over the place. Dangerous for employees. Blades dulled easily, leaving flags and folder-over leads. Cut and damaged solder connections.

Go buy lead forming equipment from

* HEPCO, Inc. HEPCO, Inc. is the world's leading manufacturer of Component Lead Prep, BGA Reballing, and RoHS/WEEE & Lead-Free Testing Equipment. Sunnyvale, California, USA Assembly, Component Preparation, Manufacturer of Assembly Equipment, Repair/Rework,Test Services

* Fancort Industries, Inc. Fancort Industries products include cutting equipment, bench air presses, and racks and fixtures. West Caldwell, , New Jersey, USA Manufacturer of Assembly Equipment

* DDM Novastar Turnkey SMT assembly solutions, manual & automated stencil printers, manual & automatic pick & place systems with dispensers, wave solder & selective solder machines, lead free solder reflow ovens, component counters, & thru-hole King of Prussia, Pennsylvania, USA Manufacturer of Assembly Equipment, Pick and Place, Screen Printing, Soldering, Turnkey

* Versatec Authorized manufacturer, re-manufacturer and service center of Contact Systems CS-400 Series Through Hole Cut & Clinch insertion machines and C3 and C5 First Generation Series SMT placement PCB assembly machines. Danbury, Connecticut, USA Manufacturer of Assembly Equipment, OEM, Pick and Place, Repair/Rework, Service Provider

* GPD Global A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Component-Prep Systems. Grand Junction, Colorado, USA Adhesives/Dispensing, Component Preparation, Manufacturer of Assembly Equipment, OEM

* 1st Place Machinery Inc. A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery. Middleton, Massachusetts, USA Equipment Dealer / Broker

reply »


PJC

#76032

Lead trimming | 20 July, 2016

EBSO is headquartered in Germany and has a full line of lead trimming equipment. The lead trimmers are sold in the US through A-Tek Systems Group (atekllc.com)

reply »

#76078

Lead trimming | 29 July, 2016

Versatec specializes in the remanufacture of Contact Systems machines, most notably the CS-400E component locator with programmable cut and clinch. these machines are field proven over the past two decades and provide many benefits when utilized: 1. programmable cut length and clinch angle for each component 2. less processes...no need for fancy lead trimming and prepping prior to insertion 3. related to number 2...floor space requirement is reduced 4. increased reliability...cutting leads after soldering process can damage the solder joints (maybe go undetected with intermittent micro fractures)...this can lead to costly recalls or warranty issues with your products. 5. added benefit of semi-automatic system that indicates proper insertion points for each component and also indicates polarity if required...so dramatic reduction in rework due to wrong component or wrong orientation insertions. ...and more....not sure if this type of machine would be overkill for your application but please see our website for more information at versatecsolutions.com

reply »

Plasma Prior to Conformal Coating