Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


265 GSX printer

Views: 3077

#75901

265 GSX printer | 22 June, 2016

Hi all,

I have a problem on my 265 GSX printer.

"Position error" on the rising table. Machine was running fine and then out of the blue the error occurs, takes a few power downs and not working...

The table does not move then error occurs...

Also fuse for 44VAC keeps going on

Any advise appreciated.

reply »

#75902

265 GSX printer | 22 June, 2016

It could be the brake for the rising table. I don't remember if it runs on 44 volts but if it is bad it will prevent the table from moving and may blow the fuse.

reply »

#75903

265 GSX printer | 22 June, 2016

brake is out, also a card X7 seams to be bad. Any idea of what could have cause it?

reply »

#75905

265 GSX printer | 23 June, 2016

Not sure what may have taken them out. Maybe the brake going bad overloaded the card. John at http://www.dekhead.com has helped us before, he may have some more info.

Travis

reply »

#75909

265 GSX printer | 24 June, 2016

Thanks, already contacted John. Working on fixing it

reply »

SMT in-printer dispensing

SMT Custom Nozzles