Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


DEK Galaxy CAN Node Not Responding Error

Views: 948

#75793

DEK Galaxy CAN Node Not Responding Error | 30 May, 2016

Hi Folks,

I'm having issues with our dek Galaxy which is randomly having and reporting the error CAN Node Not Responding.

Has anyone seen / fixed this error before?

reply »

#75805

DEK Galaxy CAN Node Not Responding Error | 1 June, 2016

CAN Node Not Responding This problem can be caused by either: 1. Faulty Node 2. CAN bus cable disconnected. 3. No power to CAN Node.

reply »

#75809

DEK Galaxy CAN Node Not Responding Error | 2 June, 2016

Thanks, I have managed to get a step further and now get the additional info on the error that it is node 1.

All cables are connected, will double check the power but I believe it has power, I seem to be able to drive everything in diagnostics mode with it failing randomly which makes me think it's a faulty node.

reply »

#75815

DEK Galaxy CAN Node Not Responding Error | 2 June, 2016

If it is intermittent it is definitely cable or connector. Check all connections first and if not, replace the cable that is moving/bending.

reply »

SMT, PTH, AOI,  and Test machines for sale - ECM Equipment

SMT Replacement Nozzles