Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Auto calculate Aperture are on stnecils

Views: 2082

#75760

Auto calculate Aperture are on stnecils | 20 May, 2016

Hi All I have a need to calculate the Aperture area in a stencil with in a very short time without going in to a CAD viewer. I need that when I insert solder paste file in to a certain software application and that application software calculate the area of each Aperture in the stencil and output a single value of the total area covered by the Apertures. Thanks in advance for any information, Milroy

reply »

#75813

Auto calculate Aperture are on stnecils | 2 June, 2016

I usually get a excel or word file from my stencil house with all the data you need. It give you aperture sizes, volume and Aspect Area ratio...

DCode Shape X-Size Y-Size Pitch Volume Area Ratio Aspect Ratio Qty

D10 Rectangle 0.111350 0.045900 0.000036 2.321583 6.557143 64 D11 Square 0.053100 0.053100 0.000020 1.896429 7.585714 32 D12 Rectangle 0.053100 0.044100 0.000016 1.720833 6.300000 16

reply »

#75848

Auto calculate Aperture are on stnecils | 6 June, 2016

Valor mss process preparaton has a stencil tool module that can do just what you want as well as alarm you if for a defined thickness what apertures need attention

Is template driven so can save your stencil processing and settings..

Is powerful tool to get first time right stencils...

reply »

Boundary Scan

 Reflow System