Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Samsung CP45 Swing Mirror motor replacement

Views: 1242

#75733

Samsung CP45 Swing Mirror motor replacement | 16 May, 2016

Our CP45 swing mirror motor (Panasonic AC Servo Motor: MSMA012A3A) recently jammed and required replacement. I replaced the motor with a new one however it won't home. A link to a video of the motor attempting to home can be seen below. I am wondering if there is anything that needs to be done within the MMI application or on the motor driver.

https://dl.dropboxusercontent.com/u/10838737/VID_20160322_101447.mp4

reply »

#75736

Samsung CP45 Swing Mirror motor replacement | 16 May, 2016

Update to the above. I swapped the swing mirror motor and cable across from our other Cp45 machine and the system homes correctly. It seems the second hand replacement motor may have been taken from the conveyor width adjustment assembly of another machine. Since we had to cut and rejoin these cables perhaps there is some noise being induced on the encoder lines?

reply »

#75746

Samsung CP45 Swing Mirror motor replacement | 17 May, 2016

I would replace it on new one

reply »

SMT Custom Nozzles

ii-feed SMD Intelligent Feeder