Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Feeder Type

Views: 1288


Feeder Type | 22 April, 2016

Hy, I do programs pick & places Samsung . I have a line consisting of a sm471 and sm482 ! to make progamas and optimizes them use easyOlp , these machines use electrical feeders that is SM8 for 0805 SM12 for circuits . My problem is that when I open the program on the line and open the configuration of the components feeders station as SME8 And SME12 , and the machine not assembling if it is not one by one change to the correct feeders! Does anyone know why this? i have others Samsung lines and this not happens!

reply »


Feeder Type | 22 April, 2016

you have an old version of easy olp and you have old machine software. Contact your local Samsung guys to get the latest software and get upgraded.

reply »


Feeder Type | 26 April, 2016

Thank you! I will ask for updates ! But I think the software is up to date machines because these are new !

reply »


Feeder Type | 27 April, 2016

also there is a configuration that needs to be set correctly to auto detect the feeders proberly

reply »


Feeder Type | 28 April, 2016

You know where I can find this setting ?

reply »

SMT Custom Nozzles

PCB Routers