Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


DEK 03 - Consumable Replenish Error

Views: 1626

#75421

DEK 03 - Consumable Replenish Error | 7 March, 2016

I continue to get this error for about a week now and still have not been able to clear it. I can continue running but just need to click to confirm. So I have a feeling it is a simple fix that I am overseeing and need your input on. We have looked around the sensors and have replaced the vortex pad but we continue to get this error and our cleaner is not currently working because of it. Any advice?

Attachments:

reply »

#75430

DEK 03 - Consumable Replenish Error | 8 March, 2016

Dead sensor ? Try a little of your consumable directly on the sensor while monitoring it's output with a multimeter.

sarason

reply »

#75434

DEK 03 - Consumable Replenish Error | 8 March, 2016

If it is a Vortex Cassette error, that is based on "Cassette Life" Programmed into Product file. Maybe erroneous software setting.

reply »

#75477

DEK 03 - Consumable Replenish Error | 25 March, 2016

Hello, does it show which consumable it is? It looks simple - all consumables on Dek 03 require for them to tell them that you are replacing them in the proper menu, otherwise will give you error even if you replaced them. For example you can check a few items: 1. Press on the manage paper and replace the paper properly - it is very important for the paper, otherwise can give you errors like that. 2. Check your cleaning material weight sensor. 3. Check you paste dispenser and sensor to it (if you have this).

For me, if it is stopping on cleaning it is either 1 or 2. You just have to replace them properly on the right menu. Best of luck, I hope you fix your problem.

reply »

Reflow Ovens thermal process improvement

Reflow Oven