Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Topaz Xll tall components

Views: 3064

#75063

Topaz Xll tall components | 14 December, 2015

Good Day for Everyone! TOPAZ XII can handle 6.5mm height components easily. Is it possible to mount 10mm? The problem is that the picked high component pushes away other placed high component. Camera alignment works well. Please share your experience :)

reply »

#75071

Topaz Xll tall components | 14 December, 2015

Marius,

Place the component furthest away from the feeders first.

reply »

#75073

Topaz Xll tall components | 15 December, 2015

Thanks for reply. I've tried to arrange the sequence already, but the panel is 2x10 and 1 row is 180 deg rotated. I have an idea to duplicate component and place it at the rear mount plate.

reply »


JR

#75141

Topaz Xll tall components | 5 January, 2016

there is (or was), a CCD camera option to enable component heights up to 11mm part over part.

reply »

#75613

Topaz Xll tall components | 28 April, 2016

Hi Marius, If you discover you need custom nozzles get a quote from here. http://www.nozzleforled.info/

reply »

PCB Rework / Repair Services

 Reflow System