Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


FUJI IPII ESC 3 Cycle Alarm

Views: 940

#74772

FUJI IPII ESC 3 Cycle Alarm | 23 October, 2015

During production the machine Cycle Alarm ESC 3. When cycling power the error shows up again during a zero set after performing the Z1 zero set. When it errors out on zero set the only option that the machine allows is to power off. Thanks in advance.

reply »

#74774

FUJI IPII ESC 3 Cycle Alarm | 23 October, 2015

The machine will allow more functions other then power off, forgot to press reset button. Any one know what ESC 3 means?

reply »

#74841

FUJI IPII ESC 3 Cycle Alarm | 7 November, 2015

> The machine will allow more functions other then > power off, forgot to press reset button. Any one > know what ESC 3 means?

Promise me 3 peanuts and a book of matches, and i will try to find out. I mean, are you still having the problem?

reply »

#74842

FUJI IPII ESC 3 Cycle Alarm | 7 November, 2015

Oh, IP2, holder 3 is not making the sensor that confirms it is up far enough for the X2 to move. It may even be just timing.

reply »

SMT Custom Nozzles

PCB Routers