Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Mydata Lift motor 2 amplifier error

Views: 461

#74733

Mydata Lift motor 2 amplifier error | 15 October, 2015

troubleshooting a table lift error on MY12. Error code: F-MOT_Releaseboard conveyor lift/1304.

Basically, the table got stuck on the up position. Also bench tested both lift motors and they are ok.Rotated the lift motors manually to test the encoders and they both register movement in the software. So lift motor and encoders work.

Also tried disconnecting lift motor 2 and initialized with no results.

Suspecting y wagon control board may be the problem. Conveyor type T3, T4, T5, T6.

reply »

SMT Custom Nozzles

 Reflow System