Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Quad oven-Need "offset.exe" s/w to calibrate temperature offsets

Views: 430

#74691

Quad oven-Need "offset.exe" s/w to calibrate temperature offsets | 6 October, 2015

Update 6 Oct 15:

We have completely re-configured the oven PID boards such that everything is now visible on the oven by the s/w and all is now OK since the "Machine"card is now recognized. We have just one additional procedure to do and that is to calibrate the PID LON cards but this requires a program called "offset.exe" which we do not have. This is included with the QRS Plus software but we must be using an earlier version s/w. This program calculates the zone offsets such that we can calibrate the oven.

Our Quad oven Model is: PRO-5-S-C, running Oven Controller S/W version 1.20.

Would anyone have the "offset.exe" stand alone s/w program such that we can complete our oven recovery back to normal, thanks in advance.

Many thanks to George Castonguay at Precision Placement Machines Inc for his expert help to date with this problem.

Regards,

JR

reply »

Boundary Scan

SMT Custom Nozzles