Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


X Tek Xray inspection HMXST-160 error

Views: 1032

#74298

X Tek Xray inspection HMXST-160 error | 30 July, 2015

We are having X-Ray Machine X TEK HMXST-160 The machine is working fine with respect to Interlocking , X-ray on , but not able to zoom and move the Joystick positions ,it is stand only in one position while starting the application we are getting following detailed Error Massage 1)Could Not Run IXS application on NEXTMOVE card 2) Can Not perform Homing Operation , the manipulator is busy Pls help to resolve this issue

reply »

#74299

X Tek Xray inspection HMXST-160 error | 30 July, 2015

Hi,

I had similar problem on my Dage X-ray machine. I had to reinstall the firmware for the Nextmove card. Check your CDs you have with the machine and you should have a software(and manuals) which you will use to reinstall the firmware on your controller. I Hope this helps.

reply »

Solder Paste Inspection

PCB X-Ray Inspection