Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Quad 4c autoprogram again

Views: 6184

#74205

Quad 4c autoprogram again | 12 July, 2015

Hi, I just got a Quad IVc and I'm learning to use it, I got manuals and it is up and running on DOS with windows 3.1 but I noticed that it the Autoprogram is missing, Does anybody has a copy that can share.

Regards

Yadir

reply »

#74209

Quad 4c autoprogram again | 13 July, 2015

Autoprogram requires win 3.11 or windows 95 to run. It will not work with anything higher than that. If you still want to give it a try go to my website @

www.precision-repairs.com

and e-mail me and I will send you the 5 autoprogram disks that I have zipped up.

Bob

reply »

#74210

Quad 4c autoprogram again | 13 July, 2015

Thank you Bob,

I do have windows 3.11 and I will email you

Regards Yadir

reply »

#74311

Quad 4c autoprogram again | 1 August, 2015

Send me your email address Mine can be found here. http://members.iinet.net.au/~sarason/ regards sarason

reply »

#74313

Quad 4c autoprogram again | 1 August, 2015

Hi Sarason, Bob already sent me a copy. Thank you for willing to help.

reply »

#74315

Quad 4c autoprogram again | 1 August, 2015

I have a copy of windows 3.11 running on DOSBox with Autoprogram running. I have never had much success in understanding this piece of software. I was hoping to discuss it with you offlist.

regards sarason

reply »

#74839

Quad 4c autoprogram again | 6 November, 2015

I too am running my Quad IIIc with a Dosbox version of auto program. I have been able to deal with the little quirks fairly well so far, enough that I have gotten by. What sort of questions do you have?

reply »

#74866

Quad 4c autoprogram again | 12 November, 2015

Contact me at the address on my webpage.

http://members.iinet.net.au/~sarason/

sarason

reply »

SMT Custom Nozzles

PCB Buffers