Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


GSM Zeroing problem

Views: 2202

#74174

GSM Zeroing problem | 8 July, 2015

Dear SMT Specialists

Had anyone encountered GSM ADvantis zeroing failure problem? The x-axis is idle while the y-axis is waiting to be activated. My initial guess is either Axis control board or machine configuration conflicts. How to fix it? any less painful solution to detect the problem...

Many Thanks.

GTing

reply »

#74182

GSM Zeroing problem | 9 July, 2015

Is the y axis sitting on the out of limit switch by chance

reply »

#74183

GSM Zeroing problem | 9 July, 2015

Thanks for the inquiry. We used MCD (Motion Control Dia) tool to verify if that is caused by VRM board. No respond(I means the related axis was off) was detected. we swapped that board to other machine, the VRM card was good.... X axis was stopped, the Y axis won't active...

reply »

#74230

GSM Zeroing problem | 16 July, 2015

Can anyone tell what Axis controller and VRM-MC board does in GSM machine?

Regards

reply »

SMT Equipment Service

Reflow Ovens thermal process improvement