Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


  • SMTnet
  • »
  • Electronics Forum
  • »
  • looking for any body that works on old Panasonic MV, Fuji CP642, Speedline MPM 2000 and 3000

looking for any body that works on old Panasonic MV, Fuji CP642, Speedline MPM 2000 and 3000

Views: 3974


tom

#74141

looking for any body that works on old Panasonic MV, Fuji CP642, Speedline MPM 2000 and 3000 | 29 June, 2015

looking for some one that works on these machine for a living, that my company can higher from time to time to do some work on them.

reply »

#74142

looking for any body that works on old Panasonic MV, Fuji CP642, Speedline MPM 2000 and 3000 | 29 June, 2015

We service MPM machines. Tom Nisbet tom@goppm.com 603 765-8814 www.goppm.com

reply »

#74165

looking for any body that works on old Panasonic MV, Fuji CP642, Speedline MPM 2000 and 3000 | 2 July, 2015

Been working on MPM printers for 20+ years; it's what I do! (CM, Speedline FSE/Trainer, Independent contractor) If MPM built, I keep them running. AP's to Accela's. info@primetechservices.net 858.449.0007

reply »

#74211

looking for any body that works on old Panasonic MV, Fuji CP642, Speedline MPM 2000 and 3000 | 13 July, 2015

Tom,

I use the same Fuji machine you are referring to. The company that I use is ibe smt. Alex Dalgleish and Larry Johnson both are very well versed in these machines, and they stock parts for them as well. I have never had to look anywhere else for help when I needed it. They can even come to your facility and do calibrations as well as training. Good luck with whomever you choose.

http://www.ibesmt.com/ larry.johnson@ibesmt.com alex.dalgleish@ibesmt.com

reply »

#74220

looking for any body that works on old Panasonic MV, Fuji CP642, Speedline MPM 2000 and 3000 | 14 July, 2015

I am able to help you with Panasonic MV although some parts are had to come by. I also have experience with MPM. Let me know what you need and we can work out details.

reply »

#74335

looking for any body that works on old Panasonic MV, Fuji CP642, Speedline MPM 2000 and 3000 | 5 August, 2015

I would like to encourage Tom's suggestion of using Alex. We know him well and does amazing work. Have been using him for our CP-743's and IP3's when needed. Recommended.

reply »


tom

#76255

looking for any body that works on old Panasonic MV, Fuji CP642, Speedline MPM 2000 and 3000 | 29 August, 2016

I was wondering if you could help me with my Panasonic MV. it is throwing parts around after it picks them up . only have 3 heads work in it.

reply »

#76256

looking for any body that works on old Panasonic MV, Fuji CP642, Speedline MPM 2000 and 3000 | 29 August, 2016

We had this issue with our old MV 150. This was usually due to clogged/dirty or bent nozzles, or clogged dirty filters on the vacuum supply to the head.

reply »

  • SMTnet
  • »
  • Electronics Forum
  • »
  • looking for any body that works on old Panasonic MV, Fuji CP642, Speedline MPM 2000 and 3000
SMT Custom Nozzles

PCB machines