Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


SMT control management software

Views: 2983

#74114

SMT control management software | 22 June, 2015

In our production facility, we currently have 3 different makes of SMD machines. I am wanting to look at solutions that would allow us to control kitting, traceability, etc globally across all the machines. This would need to be a standalone system that could possibly even look at scheduling builds intelligently. I have seen MyData APM suite which seems like it does all this. Am I correct in that it can be used independent of hardware? Are there any other off the shelf solutions or would we need to develop a custom piece of software? Thanks in advance for any information

reply »


JAX

#74115

SMT control management software | 22 June, 2015

Take a look at Optimal or Optelco out of Austin. I'm not sure how many Equipment Manufacturers they have modules for at this point(FUJI, Universal, JUKI, etc..) but Mydata is one they control very well.

reply »

#74118

SMT control management software | 23 June, 2015

Hi,

We have developed different software systems for the field that you are talking. You can find information about our solutions (such as Setup Center, QLine etc) on our website: http://www.proventustech.com. Also, feel free to send me an email: alexeis@proventustech.com. By the way, we are software company that developing tools for electronic production and any our solution can be applyed for your needs.

Best Regards, Alexei

reply »

#74137

SMT control management software | 29 June, 2015

Valor MSS has options for NPI Data preparation and processing, SMT programming, documentation, verification, materials management, traceability, and QA management not just in SMT but into backend process aka manual assembly as well as production planning for SMT machines. There are not any systems than compare on functional scope as their system.

reply »

#74139

SMT control management software | 29 June, 2015

check out itacsoftware.com

reply »

#74152

SMT control management software | 1 July, 2015

I will have a look and see what may work for us. Is there no generic interface that I could possibly look at to pause the machines should we need a reel swap?

reply »

#74216

SMT control management software | 14 July, 2015

Hello, i have been using itac for half an year now, but I am not satisfied. It is not so flexible, and its very expensive (I think). The best way for me is to hire two software specialist and make your own system (bare in mind that you have to let them stay in production and learn the machines and lines). Depends on the programmers you can get a quite nice system. I have seen it work. It had traceability even on the stencils, solder paste lots and the squegees. On itac this can cost you a fortune. You can contact me if you want some more information.

reply »

#74217

SMT control management software | 14 July, 2015

Hi,

I agree that the existing systems sometimes difficult to implement. Also, as a large system so its maneuverability is low in spite of all the beautiful tools. Usually if you need something you do not find anything there. We, as a software company, have developed various tools and made adjustments based on customer requirements. Our tools and systems are built on the basis of standard tools (tools and environments from Microsoft). We are very flexible in developing and adjustments in accordance with the needs of the customer.

Feel free to visit our website: http://www.proventustech.com Also, feel free to e-mail me so we can discuss your exact needs. My email is alexeis@proventustech.com

Best Regards, Alexei

reply »

#74242

SMT control management software | 20 July, 2015

Take a look at Aegis (www.aiscorp.com). The machine vendor partnerships they have, and have maintained for over 15 years, ensure seamless integration with almost all machine platforms in the industry.

The system is modular and can be a standalone solution, or it can be expanded to do much more.

reply »

reflow oven profiler

Manufacturing Software