Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


FUJI IP3 MFU1 no power

Views: 639

#73556

FUJI IP3 MFU1 no power | 19 February, 2015

Hi there. I have an IP3 machine that refuses to power up the MFU cart on side 1. I have already replaced the I/O card but still no dice. Is there a relay or fuse that I need to check to get this to power up? The machine will not operate the camera on head 1 because of this. All tray parts will be rejected because the led rings on the camera do not light up either. Any guesses as to what might be happening here? Thanks for any advice!

reply »

#73574

FUJI IP3 MFU1 no power | 24 February, 2015

> Hi there. I have an IP3 machine that refuses to > power up the MFU cart on side 1. I have already > replaced the I/O card but still no dice. Is > there a relay or fuse that I need to check to get > this to power up? The machine will not operate > the camera on head 1 because of this. All tray > parts will be rejected because the led rings on > the camera do not light up either. Any guesses > as to what might be happening here? Thanks for > any advice!

I will check with my lead SMT. Have you double checked that both locking mechanisms are in full locking position. Also check that the power cords are locked fully as well. I know we have had problems with these tables as well. Should have more for you soon.

reply »

SMT Custom Nozzles

Real-time PCB X-ray Inspection System