Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


RH2 / RH6 Software or Communications Protocol

Views: 2460

#73439

RH2 / RH6 Software or Communications Protocol | 3 February, 2015

Does anyone know of or have a copy of the communications protocol that the Panasert RH2 or RH6 machines use?

Alternatively is there a software package that can be used to talk to these machines?

Thanks

reply »

#73460

RH2 / RH6 Software or Communications Protocol | 6 February, 2015

> Does anyone know of or have a copy of the > communications protocol that the Panasert RH2 or > RH6 machines use? > > Alternatively is there a > software package that can be used to talk to > these machines? > > Thanks

My program PCBSynergy has an output for the RH6.

It can be found at

http://members.iinet.net.au/~sarason/

regards sarason

reply »

#73463

RH2 / RH6 Software or Communications Protocol | 8 February, 2015

Sarason,

Thanks for the information. I will look into your program, but it appears to be similar to one I have produced myself. I can convert between the CAD and loading reasonably well for our RH2/RH6, but cannot communicate with them online to send the files across.

Regards,

Adrian

reply »

#73464

RH2 / RH6 Software or Communications Protocol | 9 February, 2015

How old are these machines. When I wrote the code it was blind from example files . I didn't even realize it was an axial inserter.

reply »

#73471

RH2 / RH6 Software or Communications Protocol | 9 February, 2015

I believe both are 1990's and radial insertion machines

reply »

#73472

RH2 / RH6 Software or Communications Protocol | 10 February, 2015

If you need me to do any corrections to this code to make it more workable, contact me via email on the address on my webpage. Now that I know the machine is a radial inserter the XYR's are probably wrong as they were assumed to be for an SMT machine!

regards sarason

reply »

reflow oven profiler

Manufacturing Software