Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


NOVASTAR Tune menu password

Views: 2313

#73353

NOVASTAR Tune menu password | 18 January, 2015

I have a NOVASTAR 1200 with a ProcessSentry(tm) controller. The battery backup battery went flat and thus it refuses to do any "work" because it is requesting the oven be "tuned". To enter the "Tune" menu a password is required. Does anyone know the password please?

Thanks, David.

reply »


Tom

#75047

NOVASTAR Tune menu password | 10 December, 2015

Hi David,

I posted the password a while back; I believe it is F1-left-down-right if I recall correctly.

reply »


Tom

#75093

NOVASTAR Tune menu password | 18 December, 2015

I also have the PC software for the Novastar1200 and the diagram for the serial connection. Let me know if you need it.

reply »

#75094

NOVASTAR Tune menu password | 18 December, 2015

Thanks, I was able to get a PDF of the manual which describes:

1. INSTALL EXTERNAL THERMOCOUPLE PROBE.

2. TURN ON MAIN POWER: a. Press ENTER button b. Press F1 or F2 to scroll to SET UP mode c. Press F3 to select SET UP mode d. Display will read ENTER SECURITY CODE e. Press F2, left arrow, and up and down arrows simultaneously until set-up screen appears (alarm will beep).

reply »

SMT Replacement Nozzles

Software for SMT