Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


BGA Repair information

Views: 2172


ACE

#73225

BGA Repair information | 12 December, 2014

We have 6,000 TI BGA's to remove from a PCBA and reball for reuse. TI DaVinci BGA, DIG, Media, 284 ball part number TMS320DM8148SCYEO Does anyone have a formal repair procedure or knowledge of such rework for such a part they would be willing to share? TI is not being helpful.

reply »

#73229

BGA Repair information | 12 December, 2014

there are several ways:

1. Manual method- Remove the part using hot air gun, clean the pads, make a small stencil to re-ball the BGA and it is ready for placement. 2. Improved method - Use equipment dedicated for BGA rework 3. No hassle method - Give it to a company that does rework.

reply »

#73232

BGA Repair information | 15 December, 2014

We have been specializing in BGA reball since 1991. See our webpage at http://www.pcb-repair.com/ We can do them for you and/or teach you how to do it yourself.

reply »

#73234

BGA Repair information | 15 December, 2014

We have been specializing in BGA reball since 1991. See our webpage at http://www.pcb-repair.com/ We can do them for you and/or teach you how to do it yourself.

reply »

PCB Soldering Tools

bga rework stations