Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


opalxii

Views: 880

#73039

opalxii | 10 November, 2014

We are working with SMT lines consisting of machines opalxii after 5/6 years of operation have appeared problems in operation of the engines on the x and y axes. I disassembled the engines from the machine and I removed the cap that covers the encoder;am noticed that both: electronic circuit, attached as well as reading grid are dirty with a yellow powder, which in my opinion comes from inside the motor . The motors are produced by the company: SANODENKY. Every period time 6-12 months must repeat these operations does anyone have any idea where to fix this type of engine? thank you moshe

reply »


max

#73080

opalxii | 14 November, 2014

> We are working with SMT lines consisting of > machines opalxii after 5/6 years of operation > have appeared problems in operation of the > engines on the x and y axes. I disassembled the > engines from the machine and I removed the cap > that covers the encoder;am noticed that both: > electronic circuit, attached as well as reading > grid are dirty with a yellow powder, which in my > opinion comes from inside the motor . The motors > are produced by the company: SANODENKY. Every > period time 6-12 months must repeat these > operations does anyone have any idea where to > fix this type of engine? thank you moshe

> We are working with SMT lines consisting of > machines opalxii after 5/6 years of operation > have appeared problems in operation of the > engines on the x and y axes. I disassembled the > engines from the machine and I removed the cap > that covers the encoder;am noticed that both: > electronic circuit, attached as well as reading > grid are dirty with a yellow powder, which in my > opinion comes from inside the motor . The motors > are produced by the company: SANODENKY. Every > period time 6-12 months must repeat these > operations does anyone have any idea where to > fix this type of engine? thank you moshe

> We are working with SMT lines consisting of > machines opalxii after 5/6 years of operation > have appeared problems in operation of the > engines on the x and y axes. I disassembled the > engines from the machine and I removed the cap > that covers the encoder;am noticed that both: > electronic circuit, attached as well as reading > grid are dirty with a yellow powder, which in my > opinion comes from inside the motor . The motors > are produced by the company: SANODENKY. Every > period time 6-12 months must repeat these > operations does anyone have any idea where to > fix this type of engine? thank you moshe

Hello. This is normaly for this machine. We changed a lot of motors in Russia. It is has service lives and then under replace. I think this is mistake of Assembleon in develop

reply »

BGA Rework Services

SMT in-printer dispensing