Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Cencorp TR1000 Router intermittently freezing up

Views: 2127

#72975

Cencorp TR1000 Router intermittently freezing up | 29 October, 2014

We have a Cencorp TR1000 Router that has been recently having problems. Frequently it will freeze up. This usually happens after running it for awhile.

Sometimes the machine and computer both freeze up. When this occurs we have to completely shut down the machine and restart it.

Other times the machine just errors out. When you go to move the servo and look at the current position of x and y it just shows all asterisks. When this happens the router will not move at all.

The error we are getting is: Router moved failed Not within deadband

A couple of times the router locked up and the bit was still spinning.

I was just wondering if anybody has experienced this issue and might know the cause.

reply »

#73301

Cencorp TR1000 Router intermittently freezing up | 6 January, 2015

If you still have the problem:

We are Cencorp OEM service department in McAllen TX. Can you provide the machine serial number so we can check more accurate response. The problem seems to be related PC CPU issue. Overheating or something similar.

reply »

SMT Equipment Service