Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Destacker will not separate 1mm thick boards

Views: 1897

#72936

Destacker will not separate 1mm thick boards | 21 October, 2014

My UIC destacker does fine with 2mm thick boards. However, I have to hand feed the 1mm thick boards.

I have seen vacuum board placers for small boards but not for large boards. I need to get a solution for 24" x and 16" y boards that are only 1 mm thick.

reply »

#72957

Destacker will not separate 1mm thick boards | 24 October, 2014

I'd check into the ASYS LSB-03 Bareboard Destacker. It isn't a gravity drop style. It uses edge clamps to clamp the top PCB on the stack and then drop it on the transport rail. So it doens't destack from bottom to top, it destacks from top down. We haven't had any issues whatsoever with ours.

reply »

#72960

Destacker will not separate 1mm thick boards | 24 October, 2014

Do you know the maximum board size for that destacker? I left a message with a sales rep.

btw- are you a Torch Lake guy???

reply »

Boundary Scan

PCB X-Ray Inspection System