Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


PCB edge connector

Views: 2441

#72927

PCB edge connector | 19 October, 2014

im designing a circuit that will require the use of a edge connector so it can connect to another circuit.

i need to do this so i can get both micro controllers communicating

i have done a bit of research and am thinking about using a pcb manufacture site but dont know how to do this what software will i need to draw the circuit and should a use a common edge connector like a pci one from a computer ? what about doing the edge connector on the pcb like size , depth ect

i have found some on ebay // note: a bit too big for my project//

link = http://www.ebay.com.au/itm/805-Series-Solder-Socket-2x18P-36Pin-3-96mm-Pitch-Card-Edge-Connector-/400773975624?pt=AU_B_I_Electrical_Test_Equipment&hash=item5d4ffd8e48

reply »

#72931

PCB edge connector | 20 October, 2014

pci express x1?

https://www.google.co.nz/search?q=pci+express&client=firefox-a&hs=ZJi&rls=org.mozilla:en-GB:official&channel=sb&source=lnms&tbm=isch&sa=X&ei=DZJFVKvRDaXemAXaxoCgDA&ved=0CAgQ_AUoAQ&biw=1173&bih=849#rls=org.mozilla:en-GB:official&channel=sb&tbm=isch&q=pci+express+x1

Though we just use PTH 90 degree pins

https://www.google.co.nz/search?q=pci+express&client=firefox-a&hs=ZJi&rls=org.mozilla:en-GB:official&channel=sb&source=lnms&tbm=isch&sa=X&ei=DZJFVKvRDaXemAXaxoCgDA&ved=0CAgQ_AUoAQ&biw=1173&bih=849#rls=org.mozilla:en-GB:official&channel=sb&tbm=isch&q=sip+header+pins

excuse the massive links.

reply »

PCB Routers