Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Problem with Ekra x5 Printer

Views: 1685

#72813

Problem with Ekra x5 Printer | 26 September, 2014

Hi Everyone,

I have an Ekra x5 printer and I'm having reference drive issues with my printer.

If anyone have english operator/service manual for ekra x5?

I'll be happy if someone can send me the manual for this printer.

Thank you

reply »

#72821

Problem with Ekra x5 Printer | 29 September, 2014

Check the ampifiers in the back of the machine. They should have a green led lit on them. If the light is out or a red led is lit then the amplifier is bad.

good luck

reply »

#72822

Problem with Ekra x5 Printer | 29 September, 2014

Send me your email, and I will send you a copy.

reply »

#73397

Problem with Ekra x5 Printer | 26 January, 2015

Anyone has a copy of the E5 service manual , my email add is jun-long@live.com.sg .. thanks

reply »

#73508

Problem with Ekra x5 Printer | 12 February, 2015

i found out what was the issue. driver card was bad so, that needs to be replaced. Thanks for support

but i still need 'ekra x5' manual if someone carry, please email me. every day& now some other thing needs replacement and for technical understanding manual is really important.

email: maganb@quickcircuit.co.nz

Thanks

reply »

SMT in-printer dispensing

PCB X-Ray Inspection System