Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


FUJI CP4-3 Nozzle Change Alarm

Views: 1431

#72491

FUJI CP4-3 Nozzle Change Alarm | 31 July, 2014

We currently have a CP4-3 that is having the nozzle change alarm on different holders. there was a part found in the machine and I do not know if it is part of the machine or not, see picture. Any advice on what this part is or how to resolve this issue?

Thank you in advance, Kurtis

Attachments:

reply »

#72495

FUJI CP4-3 Nozzle Change Alarm | 31 July, 2014

I do not recognize that part. Initially, lets disregard that part and try to troubleshoot. DO NOT loosen any bolts associated with the Nozzle change mechanism, else your day, will get worse.

reply »

#72496

FUJI CP4-3 Nozzle Change Alarm | 31 July, 2014

I meant to end the last post with "month will get worse".

reply »

#72497

FUJI CP4-3 Nozzle Change Alarm | 31 July, 2014

I found a bad solenoid and replaced it solenoid 15 on station 11. The machine is still erroring out. I also checked the holders and sensors and they seem to be ok. This error occurs when ever the machine tries to change nozzle sizes on any holder.

Thank You, Kurtis

reply »

#72505

FUJI CP4-3 Nozzle Change Alarm | 1 August, 2014

Hi,

I don't have any solution to the problem, but the component is an EMI-filter and not part of the machine.

// Tegel

reply »

#72506

FUJI CP4-3 Nozzle Change Alarm | 1 August, 2014

Thank you, Kurtis

reply »

#72507

FUJI CP4-3 Nozzle Change Alarm | 1 August, 2014

Does it error during nozzle center check, if so, manually switch all holders to small, try center again. It should do about 8 small nozzle centers before error, if so this helps rule out the 10th station, if not check the 10th.

reply »

#72509

FUJI CP4-3 Nozzle Change Alarm | 1 August, 2014

It turns out it was a misaligned fiber sensor on station 12?, the after rotation nozzle verification.

reply »

#72510

FUJI CP4-3 Nozzle Change Alarm | 1 August, 2014

That's great.

reply »

SMT Custom Nozzles

Used SMT machines