Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Problems with Ekra E5

Views: 2429

#72475

Problems with Ekra E5 | 28 July, 2014

Hi Everybody,

I have an Ekra E5 and I have two problems.

- Anybody have english operator/service manual to this machine?

- I have problems with understencil cleaner dispenser. If I start to flow the stencil cleaner then the dispenser doen't move or move with intermittent motion. I changed to service and tried to send it to zero point. It can't reach the zero point, the dispenser halt on one-third position everytime.

I'll really happy if somebody can help to solver this problems.

reply »

#72476

Problems with Ekra E5 | 28 July, 2014

Leave your e-mail address and I can send you the manual.

Bob

reply »

#72515

Problems with Ekra E5 | 4 August, 2014

Check your PMs, thank you.

reply »

#72542

Problems with Ekra E5 | 7 August, 2014

I am also looking for the manual. I need the manual for model# e599332. I am having a problem with the "sprinkler not in park position" error. we have three e5s that have the arm style dripper and one that has the horizontal sprinkler which I do not have a manual for.

Thanks

reply »

#72692

Problems with Ekra E5 | 5 September, 2014

My problems was solved. I needed to recalibrate the sprinkler. I used the service account and adjusted the settings in the sprinkler setup window. After a few test it work perfectly.

Thanks for help guys!

reply »

SMT in-printer dispensing

SMT Equipment