Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


DEK 265 Printer Error

Views: 2017

#72156

DEK 265 Printer Error | 27 May, 2014

Need help to resolve the problem in DEK265 paste printer The error messages are as per following details

1. When switch on the Machine we are getting error message like " Rising Table Error" -Position error.

2.While loading the Mint we are getting error message like " could not identify camera encoder fitted. repeat test "

reply »

#72157

DEK 265 Printer Error | 27 May, 2014

1. Rising Table Position error is, most commonly an issue of motor movement or sensor(s); Not receiving an expected input (sensor input / 'DONE' signal) in expected period of time. Try homing table in Diagnostics see if it moves and what movements are to try to determine what it is looking for.

But assuming you have tried to reload MINT unsuccessfully, then that needs to be addressed first.

2. Have you tried Manual select (instead of Auto Detect) in MINT download? Option will only be available with Maintenance Key 'ON'. If you do not know table and camera encoder ct, select '500' (as safe) for both, see if you can download correctly, if movement is incorrect can go back and re-load.

www.dekhead.com

reply »

SMT in-printer dispensing

Software for SMT