Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Depanelling scoring groove PCBs

Views: 4105

#71902

Depanelling scoring groove PCBs | 2 April, 2014

I need support to find out a good compact depanelling equipment that can be setup in a work cell as part of the final assy process for PCBs with scoring groove. If someone has experience with something similar any suggestion of guidance will be helpful.

reply »

#71903

Depanelling scoring groove PCBs | 2 April, 2014

Hi Beto, We've been using for more than 3 years the "FKN Systek Model K3000S", It's very simple, cheap and easy to use. So far so good, no issues at all. Good luck!!

reply »

#71907

Depanelling scoring groove PCBs | 2 April, 2014

I've been using the SEP1M, which functions well for mechanical separation. I recommend the motor driven version. http://www.olamefusa.com/e_sep1.htm#SEP1M

reply »

#71908

Depanelling scoring groove PCBs | 3 April, 2014

we also use the FKN Systek K3000, we have 4 of these and two of the motorized K4000's both are easy to use and reliable. FKN also has a blade sharpening service.

reply »

#71909

Depanelling scoring groove PCBs | 3 April, 2014

We use Maestro machines. They work well.

reply »

#71929

Depanelling scoring groove PCBs | 8 April, 2014

Hola Beto

Here we use this one CAB MAESTRO 3E it's ok does the job well and both blades can take a beating before need to change them.

http://www.cab.de/en/electronics/pcb-separators/maestro-3e/

Saludos Beto

reply »

#71962

Depanelling scoring groove PCBs | 16 April, 2014

We have several, the one everyone likes is a Fancort VPD5-330. We were having trouble with cracked ceramics near the score line with our pizza cutter style depaneler. The linear blade made it go away entirely. Not the cheapest, though.

reply »

#72017

Depanelling scoring groove PCBs | 28 April, 2014

Caution: Do not overlook the dust and fragments that will result from this activity. Clean the PCBs somehow to avoid that simple problem. If of course, that this happens on the front end.

reply »

#72155

Depanelling scoring groove PCBs | 26 May, 2014

we have 2 maestro 3 and 2 FKN.I think Maestro 3 i s better.

reply »

Lead Free Wave Solder - 1 Click SMT