Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Looking for a new pick & place machine

Views: 3485

#71879

Looking for a new pick & place machine | 27 March, 2014

We are going to buy a new pick & place machine and we have an offer for a Siplace SX1 and we want to know your opinion about this machine or siplace in general.

thanks

reply »

#71881

Looking for a new pick & place machine | 27 March, 2014

Hello,

we have several generation of Siemens machines and one of our lines is ASM SX1 series. Machine is very accurate and reliable as a hardware, but in my opinion the software is their biggest advantage. Software is very powerful and can do things that other brands can't.Feeders are also very good quality. Support is high level. I have experience with Universal, Fuji and Juki(all of them good machines) from the past but I will recommend ASM SX without any doubt.

reply »

#71886

Looking for a new pick & place machine | 28 March, 2014

Hi and thank you for your answer! I created a new thread called SIPLACE SX1 vs FUJI AIMEX II where we want to get people suggestions. The fact is that I´m software developer and my company want to get comunity opinion before to buy a new machine and for me, all this stuff is crazy.

I really appreciate all your answers thanks a lot

reply »


JAX

#71896

Looking for a new pick & place machine | 31 March, 2014

Both Manufacturers and Machine Types are a good choice... Why just these two Manufacturers? Depending on your needs (Changeover times, Board Size, Part Size, Part Counts, Odd Form requirements, CPH requirements, and the list goes on), there might be better equipment. Every Manufacturer has a targeted market segment they focus on and try to flex the usage of their equipment to match the remaining market. If you fit into one of those for Siemens or Fuji then great... just wondering how you narrowed it down to the two.

reply »

#72050

Looking for a new pick & place machine | 1 May, 2014

You may use pcbmaking.com to get your job done effectively and affordably. Hope this will help you!

reply »

#72051

Looking for a new pick & place machine | 2 May, 2014

Well I am not very well aware of these machines. But in 2011 a Spanish company increase the capacity by more than 160% with the help of Siplace x series.

reply »

#72118

Looking for a new pick & place machine | 15 May, 2014

> We are going to buy a new pick & place machine > and we have an offer for a Siplace SX1 and we > want to know your opinion about this machine or > siplace in general. > > thanks

Hi

yes, it is right that to make it clear first that what kind of product you focuse on , small volues ?

reply »

ii-feed SMD Intelligent Feeder

PCB equipment