Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Juki Feeder Trolley with feeder bank

Views: 3664

#71781

Juki Feeder Trolley with feeder bank | 27 February, 2014

My company uses a Juki KE-2020L and a Juki KE-1070L pick and place. I am trying to locate feeder trolley's with feeder banks that would be compatible with these machines but am having a hard time finding anything.

Anyone have suggestions of where to look?

Thanks in advance for any advice!

reply »

#71787

Juki Feeder Trolley with feeder bank | 28 February, 2014

Craig,we just make juki cf/af/ff feeders,but hasn't encountered such problems,perhaps I did not very understand the intention,normally install reels on proper feeders,and install feeders on proper position of feeder trolley,but you want realize more function?

David

http://www.smt-precise.com.cn

reply »

#71799

Juki Feeder Trolley with feeder bank | 4 March, 2014

We have a KE2060, 2080 and an older 750. All of these use same feeder trolleys. I presume the 2020 and 1070 also offer same trolley compatibility.

If machines are not set up for trolleys, you will need conversion kits to utilize trolleys, which should be available from Juki (for a handsome price).

reply »

#74107

Juki Feeder Trolley with feeder bank | 18 June, 2015

We have Juki 2000 series feeder carts. Let us know if you have any interest.

Thanks.

reply »

SMT Custom Nozzles

Non-heated dispensing system