Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


MyData TP9 dead?

Views: 915

#71681

MyData TP9 dead? | 6 February, 2014

Hi all,

During our last production run, our MyData TP9 machine shut down on its own mid assembly. Screen went blank. I turned off the power switch and waited 10mins before trying to power it up again. I turn the switch on and hear the fan turning on and the MOT cards lit up but both MOT3 cards flashed blue lights. Machine does not boot. Any insight would be much appreciated! Thanks.

reply »

#71682

MyData TP9 dead? | 6 February, 2014

1. Fuse 2. Power Supply 3. Power Distribution card 4. Booster

Start by checking all of the fuses on the front of the power supply (accessed by removing the front cover of the machine). Then, check all of the fuses on the first card in the MOT bay.

Cheers, ..rob

reply »

#71684

MyData TP9 dead? | 6 February, 2014

Thanks Rob, will give those a try! In the meantime keep the advices coming!

reply »

SMT Custom Nozzles

PCB X-Ray Inspection System