Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Pick n Place tape dot

Views: 4799

#71680

Pick n Place tape dot | 6 February, 2014

Years ago I received a sample of adhesive dots that were on tape and reel and could be pick n placed with standard equipment and withstood reflow. I have a current need for these and cannot remember a vendor or manufacturer. Does anyone know of this product, or similar products that would allow me to pick and place a small adhesive tape allowing a chip body to be placed on top? The desire is to prepare a large amount of parts for manual soldering (customer mods).

Thank You

reply »

#71683

Pick n Place tape dot | 6 February, 2014

If you get a response to this, I might have a need to look into something similar. Though, I don't need adhesive..I need something more like kapton or masking dots. I am working on a new job that requires conformal coating, and LEDs that need to be masked before coating...if there were a pick and place solution, I'd definitely be interested.

So...in other words...I can't help you...but, I'm interested in whether or not someone else can!

cheers, ..rob

reply »


RLM

#71688

Pick n Place tape dot | 7 February, 2014

Hover Davis makes a feeder for labels that works with many pick and place machines. Identco is a distributer for them and may be able to help with the material to.

reply »

#71701

Pick n Place tape dot | 10 February, 2014

Companies like Nortec offer polymide dots in tape and reel. A simple search for kapton dots or polymide, polyester dots can bring the results you are looking for.

reply »

#71770

Pick n Place tape dot | 25 February, 2014

Stellar Technical Product, we been ordering from them for almost 6 years. My needs where to be used with connectors or power modules on a tray without pick up area (dots) for pick up Fuji nozzle of 5mm. There is no P/N because is a special order, but here is the order description: Kapton Dots 6.5 MILS 5/16 (Approved Manufacturers .3125). Remember that the thickness is very important. Hope it helps!

reply »

#72556

Pick n Place tape dot | 12 August, 2014

This is helpful information. PROMATION just released a low cost stand alone pick and place for pre-printed labels which would also include Kapton Dots. So if you do not want to tie up your pick and place this could also be an option for placing them.

reply »

#72587

Pick n Place tape dot | 18 August, 2014

So I wanted to provide up-dates on this process. I contacted the supplier recommended and they do NOT offer the kapton dots on a single row for automated processes. Just sheets, however I did find that Identco offers an 8 mm round kapton dot in a single row made for automation. The material is a PT205HD that can be removed after the selective soldering, coating or other processes. The media comes on a Release Liner making it perfect for automation and leaves virtually no residual after removal. PROMATION's LABELPRO1 can pick and place this media onto populated PCBs if there is interest. I hope this helps.

reply »

#72619

Pick n Place tape dot | 26 August, 2014

I've given up on my search for this solution, personally. I wasn't able to land the customer that it would have benefitted me for, and the company I was working for shuttered operations.

But, with that said, if anyone is looking for a custom sized kapton dot, I was able to figure out that Hisco would be able to offer this service (essentially, they'd custom make the dot for you). I never got to the quoting phase, so, I'm not sure what that would look like...likely some custom tooling charge, as well as mark-up on the material. There are, likely, other companies out there that would custom cut the kapton material to whatever dimension is needed.

cheers, ..rob

reply »

Plasma prior Conformal Coating

Reflow Oven