Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


UNIVERSAL GSM1 UIMC card jumpers

Views: 2287

#71672

UNIVERSAL GSM1 UIMC card jumpers | 5 February, 2014

Hi, I have an old GSM1 p&p machine unused for some time and I would like to know if someone can give me the correct jumper settings for the 3 Radisys UIMC axis control cards that go on slots 10,11 and 12.Someone modified card positions and I dont know the correct order and jumper settings for each.

reply »

#71676

UNIVERSAL GSM1 UIMC card jumpers | 6 February, 2014

Hey,

First you need to check if the I/O port setting is ok. Also how many jumpers are you using? Atlast always connect JP4 to PLD registers base address

reply »

#71677

UNIVERSAL GSM1 UIMC card jumpers | 6 February, 2014

I guess this is what you wanted...

Attachments:

reply »

#71678

UNIVERSAL GSM1 UIMC card jumpers | 6 February, 2014

This is just what I was looking for.I dont have the manuals. Many thanks.

reply »

#71686

UNIVERSAL GSM1 UIMC card jumpers | 6 February, 2014

Do You know what is the purpose of slot 12 card, the third one?I it has the fail led on after startup so it cannot pass the machine model loading stage.

reply »

#71697

UNIVERSAL GSM1 UIMC card jumpers | 10 February, 2014

Sorry, I did not check the forum for a few days. Slot 12 controller is in charge for PWC and Beam1 Head1 (front) theta and Z axes.

Which sw. version is installed on your machine?

reply »

PCB machines

Heller Industries Mark 5获得了 2015年中国SMT远见奖 - 回焊炉领域