Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


EKRA E4 password question

Views: 3102

#71639

EKRA E4 password question | 27 January, 2014

Does anyone know if there is a standard administrator password.

I have the operator level password and also the Service password but i cannot log into the mid level where you teach a program. is there a way to reset this? or is there a standard one? in my manual it keeps referencing it like there is one in the maintenance manual but i cannot find it in there.

reply »

#71640

EKRA E4 password question | 27 January, 2014

Try 2211, on the X5's this is reserved for inspector, but it may be what you're looking for.

reply »

#71643

EKRA E4 password question | 28 January, 2014

Chris the standard service password works but to change the board dims and fid locations i need "operator" password which I don't have.

reply »

#71644

EKRA E4 password question | 28 January, 2014

Have you tried 4530, again for the X5's this is our operator password.

Good luck

reply »

#71648

EKRA E4 password question | 28 January, 2014

Perfect. it worked! thanks!

reply »

3D SPI

Reflow Oven