Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


cp65 Thermal Alarm

Views: 1018

#71545

cp65 Thermal Alarm | 3 January, 2014

CP65 error code Thermal Alarm.I have checked for overload on all axis motors. None are faulty. Any suggests.

reply »

#71546

cp65 Thermal Alarm | 3 January, 2014

SET-MANUAL-IO

Thermal alarm can be an overload relay, vacuum pump for nozzles or scrap vacuum. It may also be overtemp from the cam box "oil" temp. The 2 overload relays have reset buttons, press and try to feel for a "click". If it is directly tied to D2 set, disconnect the wires, there may be a short, dropping the DC power supply and causing unrelated problems.

reply »

reflow oven profiler

Lead Free Wave Solder - 1 Click SMT