Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Speedline MPM UltraPrint 500 Software

Views: 3184

#71417

Speedline MPM UltraPrint 500 Software | 21 November, 2013

We have a Speedline MPM UltraPrint 500. The Hard drive currently in it has bad sectors, and so I had tried to install a new hard drive and used the installation folder from the old one to re-install SigmaPro 32. When I start it fails to find the Meteor driver, so I found that folder and manually installed that by dragging the INF onto the exe. It gave no errors but still sigma pro won't run because of Meteor.

I can still run SigmaPro from the failing hard drive but my worry is that once it fails completely we now are down a screen printer. Can anyone direct me to where I might be able to get the software?

I believe it is running Version 6.32

reply »

#71596

Speedline MPM UltraPrint 500 Software | 17 January, 2014

A UP500 Wow! I did work on one last year. Most left out there are labeled QUAD AVX500's, then Speedline bought Sigmaprint and it became a UP500. But you get the MPM sigpro software with the Speedline machine; they didn't build to many. It was used on the 400, 500 and UP1500. I probably have a copy of 6.32 somewhere. Contact me directly or call and I will see if I can send you a copy. You can look me up under PRIME TECH

reply »

#71597

Speedline MPM UltraPrint 500 Software | 17 January, 2014

I suggest you to have error fix tool and execute it periodically as a safety measure. Check this link. My be this will help. http://www.pcmaxutilities.com/wikiexefiles/onyak-sigmapro-sqldatap-error-fix-guide.html

reply »

#71598

Speedline MPM UltraPrint 500 Software | 17 January, 2014

We still have two of these machines as well. Let me know if you still need the software, I think we have a copy around here I can copy.

If you have an FTP site I could probably upload a CD image for you.

reply »

#71656

Speedline MPM UltraPrint 500 Software | 30 January, 2014

> We still have two of these machines as well. Let > me know if you still need the software, I think > we have a copy around here I can copy. > > If you > have an FTP site I could probably upload a CD > image for you.

> We still have two of these machines as well. Let > me know if you still need the software, I think > we have a copy around here I can copy. > > If you > have an FTP site I could probably upload a CD > image for you.

H,

If your still having problems with this issue please go ahead and email me.

BR Keith info@sigmaprint.co.uk

reply »

#71663

Speedline MPM UltraPrint 500 Software | 31 January, 2014

I can vouch for Keith. I've worked with him in the past on the exact two machines that Bill referenced. Keith is a fine old chap, who was very knowledgable and helpful!

reply »

#71664

Speedline MPM UltraPrint 500 Software | 31 January, 2014

Thanks all, I got it working. And I also actually bought a hard drive with SigPro from Keith, or at least from sigmaprint. The actual problem I think was that we had a newer meteor card, and so the 6.32 install did not have a dll file it required. Found it on the net and then it worked. Thanks for all your help.

Trent87 Dandin87

reply »

PCB machines

reflow oven profiler