Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


  • SMTnet
  • »
  • Electronics Forum
  • »
  • Dek Infinity- Automatic Screen Changer does not load the screen in the correct position.

Dek Infinity- Automatic Screen Changer does not load the screen in the correct position.

Views: 1930

#71408

Dek Infinity- Automatic Screen Changer does not load the screen in the correct position. | 19 November, 2013

DEK Infinity-Does anyone have any information on why the automatic screen changer would load the same screen in a different position everytime you load and unload? We constantly have to do a search step for the fiducial and most of the time it will error out because its past its x,y limit of finding the fid.

reply »

#71409

Dek Infinity- Automatic Screen Changer does not load the screen in the correct position. | 20 November, 2013

Most common cause of screen load position problem is screen change drive being out of square (L>R)... This will be primarily seen in the "Y" direction with minimal effect in "X". It is possible that one of the chase rails is not locked (spring-loaded lock on rear), and changing position during screen load.

http://www.dekhead.com

reply »

  • SMTnet
  • »
  • Electronics Forum
  • »
  • Dek Infinity- Automatic Screen Changer does not load the screen in the correct position.
Fluid Dispense Pump Integration

ii-feed SMT Intelligent Feeder