Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Communication problem

Views: 1020

#70575

Communication problem | 29 August, 2013

Sent program to a CP43 and the part data was not recognized. Machine message to power down and back up, so we did so. On power up, screen appeared with the following:

OS Error Err Code 0001 Err task 0028 Err para FFFF Ex stat 0151 Err adrs CC400000 Err inst B008 Err strg 0004 Err pc 00106FC4 Dbg coun 0001 0000 0000 0000 000F 7777 ............too many to type

We want to resend the proper but we cannot communicate with the CP43 at all. We tried putting it in MEKKA mode by holding down the 3 while powering up, but we still cannot communicate. Anyone have a suggestion?

kdc45

reply »

#70579

Communication problem | 29 August, 2013

We found we had a bad communication cable which caused all of the files to be corrupted. We then held the RESET down while powering up and it successfully dumped. We were then able to send status, proper and programs to the machines. Hope this helps anyone who may have the same fluke problem.

kdc45

reply »

#70587

Communication problem | 30 August, 2013

Need to change CPU card HIMV-134. I had facing same problem. Regards, Anil Wagh.

reply »

Plasma Prior to Conformal Coating

Heller Industries Mark 5获得了 2015年中国SMT远见奖 - 回焊炉领域