Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Front camera needed

Hany A. Salam

#1911

Front camera needed | 14 February, 2000

Hello there:

We urgently need a 45mm FRONT CAMERA to be installed on a Philips pick & place M/C. The M/C model is EMERALD & it is one of the GEM line series. The camera should manage to visualize the BGA components. Please if anyone can give a hand , just contact me on my e-mail. Hany-khoga@usa.net

Thanks a lot. Hany

reply »

Carol Aviles

#1912

Re: Front camera needed | 14 February, 2000

Mr. Salam, By contacting Philips at 1-800-4Philips (1-800-474-4547) our technical support group will provide you with free technical support regarding your Emerald and camera requirements. Regards, Carol Aviles

reply »

Lead Free Wave Solder - 1 Click SMT

StikNPeelâ„¢ Rework Stencils