Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Juki KE720 software

Views: 2945

#70045

Juki KE720 software | 26 July, 2013

Hello. I am trying to find software for a Juki KE720 pick and place machine. I am planning to buy a seconhand machine but the software is missing. Would appreciate if anyone could help with where I could source the original Juki software shipped with the machine. Thanks in advance.

reply »

#70172

Juki KE720 software | 2 August, 2013

My software PCBSynergy can program a Juki KE720 It can be found at

http://members.iinet.net.au/~sarason/

regards sarason

reply »

#70212

Juki KE720 software | 4 August, 2013

Thanks for the reply Sarason. The software looks interesting, as we are a small manufacturer.

However I do need the original Juki software for a calibration file. The X axis motor has been replaced but the calibration file is missing to teach and calibrate the head.

Best regards Mark

reply »

#70220

Juki KE720 software | 5 August, 2013

The software for the machine or the CAD conversion (Flexprog)?

regards sarason

reply »

#70242

Juki KE720 software | 5 August, 2013

No the actual Juki software for the machine. Need to calibrate the machine after a motor replacement. Regards Mark

reply »

#70245

Juki KE720 software | 5 August, 2013

Sorry I can't help you with that , but there is one for sale at resurface. http://www.resurface.com.au/usedequipment.shtml

Maybe they could send you a copy

regards sarason

reply »

#70246

Juki KE720 software | 5 August, 2013

Thanks Sarson. Thats the one I'm trying to buy, but it has this missing software. Regards Mark

reply »

#70248

Juki KE720 software | 5 August, 2013

Put the question to the Zevatech group on Yahoo. There may be a few users there!

regards sarason

reply »

Manufacturing Software

reflow oven profiler