Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


CSM Philips v60 - problem with vision

Views: 1888

#70022

CSM Philips v60 - problem with vision | 25 July, 2013

Hello everyone!

I have problem with using vision in csm v60. Below describe:

1. Machine's third head takes one IC from tray

2. Goes to vision and take picture and moves IC

3. Goes to pick and place

4. When nozzle wants to place IC on board then appears Error 123: X Soft Limit

What i did:

1. I made program only with one pick and place so not to take into account other coordinates

2. Declared tray as matrix 1x1

3. Checked origin

4. Checked machine coordinates X nad Y Soft Limits.

I made experiment:

1. Coordinate pick and place the same, head number the same

2. Changed only component number from tray to 8mm feeder

3. The program executes with no errors

So if head number 3 is able to pick and place component from 8mm feeder maybe problem is in tray definition. But I do not know what to check more to find solution.

Thanking you in advance for any help.

Regards Lukasz

reply »

#70080

CSM Philips v60 - problem with vision | 29 July, 2013

Nobody has an idea how to deal with the problem?

reply »

#71179

CSM Philips v60 - problem with vision | 1 October, 2013

The problem was in the calibration of vision coordinates.

reply »

Facility Closure

 Reflow System