Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Quad IVc Pickup Optimization Help

Views: 1491

#68778

Quad IVc Pickup Optimization Help | 1 May, 2013

Hi All,

I've been using a IVc for many years. I'm to the point where I have Mod Code 8 = 15, MC9 = 500, and all Extents PU delays set to 40ish. These settings work pretty well but I would like to get them closer to factory defaults to save the lost time. I've cleaned and lubed the nozzles and Z-rod. The last Function 12 with an XG nozzle (.040 x .028)yielded 3200 and 1860 giving about 938-1072 for MC9 which drops parts all day long. These vacuum readings have been pretty consistent for a long time. If anyone has any maintenance advice I could try I'm all ears or er... I guess that's eyes.:)

reply »

reflow oven profiler

SMT Custom Nozzles