Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Quad IQ feeder does not exist error

Views: 1258

#68690

Quad IQ feeder does not exist error | 17 April, 2013

Hi,

We have QSV-1 machines with stock Quad IQ feeders (8 pins). Some of these feeders will produce a "feeder does not exist" error on both the pick and place machine as well as the OLS station.

Is this a problem that can be fixed by us or do the feeders need to be sent for repair?

Thx.

reply »

#68697

Quad IQ feeder does not exist error | 18 April, 2013

Just because a feeder has 8 pins on the front does NOT mean it is IQ. The IQ feeders started at a certain level of feeder part number.....which i do not remember being that many people dont use the IQ system.

Good Luck

reply »

#68699

Quad IQ feeder does not exist error | 18 April, 2013

> Just because a feeder has 8 pins on the front > does NOT mean it is IQ. The IQ feeders started at > a certain level of feeder part number.....which i > do not remember being that many people dont use > the IQ system. > > Good Luck

It has PLD version 3.4 and the small leds; I assumed it was an IQ based on what I've been told by others.

reply »

#68707

Quad IQ feeder does not exist error | 19 April, 2013

There should be a sticker on the feeder that says 10-??????. This is the feeder part number. I think the IQ feeder manual tells you at what point the feeders will communicate with the IQ software.

reply »

SMT Custom Nozzles

SMT in-printer dispensing