Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Mirtec Programming Discussion

Views: 1980

#68410

Mirtec Programming Discussion | 13 March, 2013

We currently own a MV-2HTLP and I was wondering if we can zoom out to check the component that are bigger in size than the view area of the machine at the default position. If it is then can someone please help me out with it.

reply »

#68411

Mirtec Programming Discussion | 13 March, 2013

Patel,

I don't think you can change the camera view as it is not moving, neither the board does. Emil

reply »

#68413

Mirtec Programming Discussion | 13 March, 2013

Evtimov,

Thanks for the information. In this case then if the component size is bigger than the view area how to I teach the part and will the machine inspect it?

reply »

#68414

Mirtec Programming Discussion | 13 March, 2013

Do not ispect whole part,just make insectionn window of part value.

reply »

#68418

Mirtec Programming Discussion | 13 March, 2013

It has been some time since I programmed a mirtec machine, but I think the technique would be to break the component into different banks of leads with unique locations. U25_Top, U25_Right, U25_LEft, etc... Use the centroid location to check presence and value, maybe polarity. Or Polarity could be included in one of the sub "banks" of leads. Keep the Centroid in the library, unlink the banks. That may work. 'hege

I have no relation to, nor do I receive any benefit from any company mentioned in my post.

reply »

#68422

Mirtec Programming Discussion | 14 March, 2013

Thank you so much for the information. It was really helpful in programming of the product and made my work much simple.

reply »

#68654

Mirtec Programming Discussion | 9 April, 2013

I am new into the programming of mirtec MV2-HT and I have tried a lot of things tyo program for the IC bridge inspector but it fails everytime, Can someone please help me learn the programming of IC bridge.

Thank you

reply »

Boundary Scan

Training Services