Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


DEK PRINTER 265

Views: 1666

#67832

DEK PRINTER 265 | 13 December, 2012

i have facing a problem in dek 265 horizon that rising table position error ,please help in for solving this problem

reply »

#67846

DEK PRINTER 265 | 18 December, 2012

Please suggest any solution for remove this error in m/c

reply »


aj

#67859

DEK PRINTER 265 | 19 December, 2012

check for power going to the motor - trip switch at back of machine...

Swap controller cards to see if the problem moves.

reply »

#67861

DEK PRINTER 265 | 19 December, 2012

1. Check for pins or something else under the rails. 2. Check the motor for the axis and the sensor that defines up position(I doubt it there is an encoder for this motor) 3. check card 4. check interface cable

reply »

SMT in-printer dispensing

Reflow Oven