Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Fuji CP4-3

Views: 3080


CPI

#67745

Fuji CP4-3 | 5 December, 2012

Does anyone have an operating manual and programming software for a CP 4-3? If so could you please contact me!! Thanks in advance!

reply »


aj

#67757

Fuji CP4-3 | 6 December, 2012

What programming station are you using?

reply »


CPI

#67759

Fuji CP4-3 | 6 December, 2012

I don't even have that at this point, these are machines we have had, and are bringing out for a high volume run. no one has ever run or programmed them! yup! I have a little work ahead of me! can I program with either mcs16 or mcs30

reply »

#67793

Fuji CP4-3 | 7 December, 2012

Hi i have operation/maintenance/specs manuals as pdf's i can send you I do not have the programming manual, I am looking for that myself

rgds

reply »

#67801

Fuji CP4-3 | 10 December, 2012

You do not want get involved with MCS if you can avoid it. It's archaic old school that 3 people on the planet know how to use properly.

reply »

#67862

Fuji CP4-3 | 19 December, 2012

I know someone who may have an F4G system for sale.

reply »

#67864

Fuji CP4-3 | 20 December, 2012

I agree with SrTech. MCS is old and not user friendly. If you decide to try it I have a MCS 16 installation manual collecting dust. You are welcome to it.

reply »

#67865

Fuji CP4-3 | 20 December, 2012

If you go with MCS I would recommend using an MCS30. You would have to make sure that the E-Proms for host communication are installed in the MCS and the host module (software)as well. You would then need CadConvert to program and transfer programs from an off-line PC to the MCS via an RS-232 cable or FTP. RS-232 is the easiest way to go. You can download or upload Source Programs, Production Programs and Part Data files. CadConvert was a freeware program available from Fuji. I still have a copy of version 2.0

reply »

#67915

Fuji CP4-3 | 8 January, 2013

I am looking to purchase a Fuji F4G system. Please let me know if you have one available.

reply »

SMT Custom Nozzles

PCB Assembly Equipment Auctions