Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Juki 740 or Panasonic MPAG3 better?

Views: 2523

#67248

Juki 740 or Panasonic MPAG3 better? | 13 September, 2012

We are going to start a smt line, but I'm totally new in this line. Currently we have these two choices, any feedback is appreciated.

reply »

#67283

Juki 740 or Panasonic MPAG3 better? | 18 September, 2012

Juki are marvelous machines. Don't know about the MPAG3.

If you need to load files into the Juki my program PCB Synergy can generate the 730 , 750 and 760 Juki files. From memory the 740 can read one of these formats. If not I can add it in. For the MPAG3 send me some files and the original data you generated it from and I will add that to the program. It already can read a number of the Panasonic machines and maybe a quick edit in a text editor will get it into this machine. Anyway the plug.

PCB Synergy can be downloaded from

http://members.iinet.net.au/~sarason/

Question which CAD package do you use to generate your PCB's

regards Sarason

reply »

#67295

Juki 740 or Panasonic MPAG3 better? | 18 September, 2012

MPAG3 is capable to detect bend pin in up and down form... but i advice to read both machine specs and compare base on your production need for a wise and best machine selection.

reply »

#67300

Juki 740 or Panasonic MPAG3 better? | 18 September, 2012

Both vendor is convinced the machine meet my production need. Since my budget is low, that is why i choose these old machine.

Any more feedback is appreciated!! :)

reply »

#67710

Juki 740 or Panasonic MPAG3 better? | 2 December, 2012

Did you end up buying either of these machines ?

sarason

reply »

SMT Custom Nozzles

 Reflow System